Advanced Instructions For Anyconnect Vpn For Mac

Posted on |



Before installing, uninstall any instance of the Cisco VPN client (or Cisco AnyConnect) on your computer. If your operating system is automatically detected, proceed with the automatic installation. If your operating system is not automatically detected, click the 'AnyConnect VPN” download link. After the download is complete, run the installer. Cisco AnyConnect is the recommended VPN client for Mac. The built-in VPN client for Mac is another option but is more likely to suffer from disconnects. Overview Stanford's VPN allows you to connect to Stanford's network as if you were on campus, making access to restricted services possible.

Downloads and Guides: Advanced Instructions for AnyConnect for VPN for Mac OS X. File System Paths. The path, or unique location of, the Cisco AnyConnect VPN for Mac OS X file system is /opt/cisco/vpn. Command Line Access. The command line interface (CLI) is available from a shell window. With the executable in the path, execute the client. Connecting to the Rutgers VPN with Cisco AnyConnect on a Mac VPN (Virtual Private Network) Client Overview. Rutgers VPN utilizes the Cisco AnyConnect Secure Mobility Application to provide secure remote access functionality for end users running Microsoft Windows, MacOS, or Linux. Installation Instructions If you're installing for a Deakin-managed Mac, you simply need to search for Cisco AnyConnect in the Self Service application. First, please visit the Deakin Software Library and search for 'Cisco AnyConnect'. Otherwise you can use the Categories sidebar and navigate to Connectivity Tools Mobile Apps Cisco AnyConnect.

NOTE: If you are using a university-owned device supported by OIT or your local IT staff, consult with them first before installing the VPN client.

Contents

Requirements

  • Operating system: MacOS 10.13.0 or newer
    NOTE: This software may work on older versions of macOS but is not officially supported by Cisco or NC State OIT.
  • Free hard disk space: 50 MB
  • Minimum display resolution: 1024 by 640 pixels
  • Administrator privileges: For installation
  • Security and Privacy setting:
    Allow apps downloaded from:
    “App Store and Identified developers.”
    For details, see Safely open apps on your Mac.

Installing the Software

  1. Download the installer file. For macOS 10.15 Catalina, download the updated Cisco AnyConnect 4.9 Client.
    You may be asked to log in with your Unity ID and password before downloading.
  2. Double-click on the anyconnect-macos-x.x.pkg file. (where x.x is a version number)
  3. In the Introduction window,
    click on the Continue button (lower right).
  4. In the Destination Select window,
    choose the disk where you want to install the software (usually Macintosh HD).
    Click on the Continue button (lower right).
  5. In the Installation Type window,
    click on the Install button (lower right).
  6. In the next window, authorize the installation on your computer by entering:
    1. User name you use to log in to your computer (not your Unity ID).
    2. Your computer login password.
      Then click on the Install Software button.
  7. In the Installation window,
    a progress bar shows the status.
    Installation may take a few minutes.
  8. In the Summary window,
    which shows the installation was successful,
    click on the Close button.

Using VPN software: Connecting and Disconnecting

Locating the client

  1. In the macOS Finder menu,
    select Go.
  2. Open the Applications folder.
  3. Open the Cisco folder inside it.
  4. In the folder contents, locate
    Cisco AnyConnect Secure Mobility Client.

Connecting to vpn.ncsu.edu

  1. In the Cisco folder, double-click on:
    Cisco AnyConnect Secure Mobility Client
  2. In the Ready to connect field, type:
    vpn.ncsu.edu
    if it does not already appear there.
  3. Click on the Connect button.
  4. In the window that opens,
    from the drop-down menu, select your Group:
    1-Faculty-and-Staff: group for all employees.
    2-Student: group for all students.
    3-Student-Health-Center: specialized group for Student Health Center.
    (Group assignment is manual.)
    4-Vendor: specialized group for vendor access.
    5-OIT-Staff: specialized group for OIT staff.
    6-Faculty-and-Staff-FT: group for all employees with all connections in a full tunnel.
    7-Student-FT: group for all students with all connections in a full tunnel.
  5. Enter your Unity ID (username), Unitypassword and in the Second Password Field type either push, sms, or a passcode to authenticate.
  6. Click on the OK button.
  7. The Duo software will then either prompt for confirmation or send a passcode. To learn more about authentication with Duo see https://oit.ncsu.edu/it-security/2fa/.
  8. On the right side of the macOS menu bar,
    a padlocked AnyConnect icon:
    indicates a completed, secure connection to vpn.ncsu.edu.
  9. A similar icon should appear in your dock.

Disconnecting the VPN session

When you finish using your VPN session, be sure to do the following:

  1. On the macOS menu bar,
    click on the padlocked AnyConnect icon:
  2. From the VPN menu that appears,
    select Disconnect.
  3. Disconnection is indicated by the absence of the padlock from the icon:

Cisco AnyConnect is the recommended VPN client for Mac. The built-in VPN client for Mac is another option but is more likely to suffer from disconnects.

Overview

Stanford's VPN allows you to connect to Stanford's network as if you were on campus, making access to restricted services possible. To connect to the VPN from your Mac you need to install the Cisco AnyConnect VPN client.

Two types of VPN are available:

Cisco Anyconnect Vpn Client Download Pc

  • Default Stanford (split-tunnel). When using Stanford's VPN from home, we generally recommend using the Default Stanford split-tunnel VPN. This routes and encrypts all traffic going to Stanford sites and systems through the Stanford network as if you were on campus. All non-Stanford traffic proceeds to its destination directly.
  • Full Traffic (non-split-tunnel). This encrypts all internet traffic from your computer but may inadvertently block you from using resources on your local network, such as a networked printer at home. If you are traveling or using wi-fi in an untrusted location like a coffee shop or hotel, you may wish to encrypt all of your internet traffic through the Full Traffic non-split-tunnel VPN to provide an additional layer of security.

You can select the type of VPN you want to use each time you connect.

Install the VPN client

Advanced Instructions For Anyconnect Vpn For Mac Windows 10

  1. Download the Cisco AnyConnect installer for Mac.
  2. Double-click the InstallAnyConnect.pkg file to start the Cisco AnyConnect Installer wizard.
  3. When the Welcome window displays, click Continue.
  4. Select your hard drive as the destination where you want to install Cisco AnyConnect and then click Continue.
  5. Click Install to perform a standard installation of the software.
  6. At the prompt, enter your administrator account password for the Mac and click Install Software.
  7. When the software has finished installing, click Close.

Download Anyconnect Mac

Download anyconnect mac

Connect to the Stanford VPN

  1. To launch the VPN client, open your Applications folder and navigate to Cisco > Cisco AnyConnect Secure Mobility Client.app.
  2. When prompted for a VPN, enter su-vpn.stanford.edu and then click Connect.
  3. Enter the following information and then click OK:
    • Group: select Default Stanford split- tunnel (non-Stanford traffic flows normally on an unencrypted internet connection) or Full Traffic non-split-tunnel (all internet traffic flows through the VPN connection)
    • Username: your SUNet ID
    • Password: your SUNet ID password

  4. Next, the prompt for two-step authentication displays.
    • Enter a passcode or enter the number that corresponds to another option(in this example, enter 1 to authenticate using Duo Push on an iPad). You may have to scroll down the list to see all of your options. Then click Continue.
    • If your only registered authentication method is printed list, hardware token, or Google Authenticator, the menu does not display. Enter a passcode in the Answer field and click Continue.
  5. Click Accept to connect to the Stanford Public VPN service.
  6. Once the VPN connection is established, the Cisco AnyConnect icon with a small lock appears in the dock.

Cisco Anyconnect Vpn Mac

Disconnect from the Stanford VPN

  1. Click the Cisco AnyConnect icon with a small lock.
  2. At the prompt, click Disconnect.